Advices
- The place of installation should be flat, solid and strong. Also, before installation, it is essential that the surfaces are free of any kind of dust and waste materials.
- In products that have a variety of colors and designs, it is better to remove all the tiles from the same package first and install them randomly, taking into account the variety of designs
- For better installation of tiles and placing them in parallel lines, etc., as well as the same amount of distance between them
- According to the type of body of the purchased tiles as well as the condition of the desired surfaces, please consult with the manufacturer's experts to prepare glue, mortar or cement glue
- To cut tiles, you can use a manual cutting machine or a water jet.
- To drill a hole in the surface of the tile, please use a diamond screw drill corresponding to the size of the desired hole
- It is recommended to use personal protective equipment when installing tiles. Safety shoes, safety gloves, safety glasses and special earplugs are recommended when cutting products
- After finishing the installation of tiles, it is recommended to remove all the remaining soil, cement and adhesives from the installation site using a buffer and a cleaner. Also, for daily washing, neutral detergents should be used
Installation location
The place of installation should be flat, solid and strong. Also, before installation, it is essential that the surfaces are free of any kind of dust and waste materials. During installation, it is better that the temperature of the environment is balanced and the installation steps should be avoided in the environment with high and low temperature. Wall tiles are not suitable for the external space of the building due to the defined standard regarding water and moisture absorption and are damaged at very high or low temperatures.
1
Design Set
In products that have a variety of colors and designs, it is better to remove all the tiles from the same package first and install them randomly, taking into account the variety of designs. If the purchased design includes decor (decorated tiles), it should be considered to match the decor design with the next decor.
2
Installation
For better installation of tiles and placing them in parallel lines, etc., as well as the same amount of distance between them, it is recommended to use cross straps.
3
Glue and Mortar
According to the type of body of the purchased tiles as well as the condition of the desired surfaces, please consult with the manufacturer's experts to prepare glue, mortar or cement glue. It is not recommended to use resin adhesives during installation in environments with high humidity. Because these types of adhesives are so-called water-loving, and over time, they break and cause the tile to separate from the wall.
4
Cutting
To cut tiles, you can use a manual cutting machine or a water jet.
5
Drill a Hole
To drill a hole in the surface of the tile, please use a diamond screw drill corresponding to the size of the desired hole. Keep in mind that it is better to use a new and unused drill bit to reduce the percentage of glaze falling off around the holes.
6
Safety
It is recommended to use personal protective equipment when installing tiles. Safety shoes, safety gloves, safety glasses and special earplugs are recommended when cutting products. Also, you should choose the right method for carrying and moving and lifting the parts.
7
Maintenance And Cleaning
After finishing the installation of tiles, it is recommended to remove all the remaining soil, cement and adhesives from the installation site using a buffer and a cleaner. Also, for daily washing, neutral detergents should be used. Pay attention, it is better to have a well-ventilated environment, and in such a situation, the tile will absorb less water and sediments.
8
